Product OverviewTwo professional-grade self-adhesive repair patches designed for inflatable castles, inflatable pools, and other PVC or vinyl inflatables. One for dry-surface repairs, one for underwater application – no need to drain the pool.

 Model A – Super Adhesive Repair Kit (for Inflatable Castles / Dry Use)

Specification | Detail |
Adhesive viscosity | 3000 mPa·s |
Glue thickness | 0.01 mm |
Safety compliance | EN71 Part III, Part 9 & ASTM 963-93 |
Application | For dry, deflated inflatables (bouncy castles, slides, etc.) |

Features  
- Super-strong bond  
- Thin & flexible – no air bubbles  
- Certified safe for child-related products  

Instructions
1. Deflate the inflatable completely. Locate the damaged area.  
2. Clean and dry the area – remove dirt and grease.  
3. Cut patch to required size.  
4. Peel off backing film.  
5. Apply patch without bubbles or wrinkles. Press firmly.  
6. Do not apply over seams or folds.  
7. Allow 60 minutes before re-inflating.

 Model B – Super Adhesive Repair Kit
| Application | Can be applied underwater

- Apply directly under water
- Instant sealing of leaks in inflatable pools, above-ground pools, and vinyl liners
- Stays adhered even in continuous water contact